Acceptable Quality Level (AQL) – Definition
The acceptable quality level (AQL) is the limit or maximum level of worst goods (defective goods) that is tolerable in a particular sample size. Goods are sampled or inspected in order to check their quality, AQL is the maximum number of defective products that is acceptable when inspecting a sample size.
There are seven levels of inspections as stipulated by ISO 2859. When these inspections are being carried out, there is a limit to the number of worst or defective goods that can be found in a sample size, any number above the limit will render the entire sample size worthless and unacceptable. If the number of defective goods is less than the limit, the product meets the acceptable quality limit.
A Little More on What is Acceptable Quality Level – AQL
An Acceptable quality level otherwise known as the acceptable quality limit. It is a statistical approach of measuring the limit or worst goods that can be in a sample size. The acceptable quality level (AQL) of products differ from one industry to another, this means that the limit to the number of defective goods vary. For instance, the AQL that will be used in the pharmaceutical industry will be different from that used in the fabric industry. The reason for this is simple, pharmaceutical products must retain maximum quality because of the health hazards that defective goods might cause, fabrics on the other hand do not have direct effect on human health. Hence, a more rigorous and strict AQL will be used for pharmaceutical products than for fabric materials.
Reference for “Acceptable Quality Level – AQL”
Academics research on “Acceptable Quality Level – AQL”
- [PDF] ACCEPTABLE QUALITY LEVEL (AQL), BAGDONAVICIUS, V., & NIKULIN, M. ENCYCLOPEDIA OF STATISTICAL SCIENCES, 23(5), 22. This paper examines the generally acceptable quality level.
- acceptable quality level (AQL), Nahler, G. (2009). acceptable quality level (AQL). In Dictionary of Pharmaceutical Medicine (pp. 2-2). Springer, Vienna. It is the maximum percentage of errors that, for quality control or sampling, can be regarded as satisfactory as an average of the entire system or process.
- Chain sampling plan (ChSP-1) for desired acceptable quality level (AQL) and limiting quality level (LQL), Raju, C., & Vidya, R. (2017, November). In AIP Conference Proceedings(Vol. 1905, No. 1, p. 050036). AIP Publishing. Whenever there is a need to use a small sample attributes plan for a scenario involving harmful products emanating from the continuous production process, Chain Sampling Plan is popularly used A procedure for development and selection of a ChSP-1 by attributes verification based on membership functions is discussed in this paper. It also explains the use of a search technique for obtaining the specifications of a mono sampling plan for a provided set of AQL and LQL values. It finally presents a sample of tables ChSP-1 plans for different integration of AQL and LQL values.
- [PDF] PENERAPAN ISO 2859 ACCEPTABLE QUALITY LEVEL (AQL) PADA PT. XZY UNTUK MENGENDALIKAN KUALITAS MATERIAL PADA DIVISI QC …
- Mariyono, T., & Sulistiyowati, W. PENERAPAN ISO 2859 ACCEPTABLE QUALITY LEVEL (AQL) PADA PT. XZY UNTUK MENGENDALIKAN KUALITAS MATERIAL PADA DIVISI QC ENTRANCE. PT. XYZ is a leading firm that manufactures footwear and is fully involved in world-class quality. Quality product creation requires quality control from raw material quality. The problem faced by the division entrance QC quality verification process is slow as there are no standardized sampling templates. The study tries to know the material receipts level via Acceptable Sampling Plans, determine the sample performance level, and the recommends quality control division standardized sampling QC Entrance with ISO 2859.
- Selection of multiple deferred (dependent) state sampling plans for given acceptable quality level and limiting quality level, Govindaraju, K., & Subramani, K. (1993). Journal of Applied Statistics, 20(3), 423-428. Provision is made for a table and a method for discovering the multi-deferred state sampling plans of type MDS-(c1, c2) that involves minimal summation of manufacturer’s and consumer’s risks for a standardized level of quality and limited level of quality